I-Data 5250 ALLY - Manual (Page 30)

AGILE 5250 ALLY User’s Guide and Reference Page 1-8
4. To cable through, simply connect to the other side of the twinax
adapter. Otherwise, the adapter will automatically terminate the
twinax line.
Connecting the Printer
Use the PARALLEL OUT PRINTER port to connect the 5250 ALLY to
the printer. A parallel output cable is included with the 5250 ALLY. The
cable supplied by AGILE may be used, or if a standard Centronics parallel
cable is already connected to the printer, it may be used instead.
The PARALLEL OUT PRINTER port on the 5250 ALLY is IBM PC, XT,
AT, and PS/2 compatible. Any cable used to connect one of these
computers to the printer may be used to connect the 5250 ALLY to the
printer.
1. Insert the Centronics 36-pin device end of the AGILE printer cable
into the parallel connector on the rear of the printer.
2. If the printer’s Centronics connector includes latches, secure them.