Intelligent Motion Systems MDriveAC - Manual (Page 26)

1-20 MDriveAC Plus Microstepping Hardware - Revision R121707
Relevant to Firmware Version 3.0.02
P3 Connector - AC Power
Pin Assignment - P3 AC Power
Euro AC Circular (Male) Function Description
Pin 1 Chassis Ground Chassis Ground of the system.
Pin 2 AC Power Line AC Power Line.
Pin 3 AC Power Neutral AC Power Neutral.
Table 1.4.4: P3 - AC Power
Figure 1.4.3: P3 3-Pin Euro AC Connector
Pin 1
Pin 3
Pin 2
3-Pin Euro AC Connector
Pin 4
Pin 5
Pin 7
Pin 8
Pin 10
Pin 11
Pin 1
Pin 2
Pin 19
Pin 18
Pin 17
Pin 14
Pin 15
Pin 16
Outside: Pins 1 -12 Inside: Pins 13 - 19
Pin 3
Pin 12
Pin 6
Pin 9
Pin 13
Figure 1.4.2: P1 Connector, Power and I/O
NEED A
CORDSET?
The following
cordset is
available to
interface to the 19-pin M23
Connector:
Straight Termination
MD-CS100-000
Right Angle Termination
MD-CS-101-000
See Appendix E for details.
WARNING! Do not
plug or unplug AC
Power at the Motor
with the power on!
Note: UL
Recognition requires
the use of the
MD-CS20x-000 or Lumberg
Equivalent AC Power Cordset.
NEED A
CORDSET?
The following
Euro AC Power
Cordset is
available:
Straight Termination
MD-CS200-000
Right Angle Termination
MD-CS-201-000
See Appendix E for details.