Insignia NS-DV111080F - Manual (Page 4)

Setting up your camcorder
To install the battery:
1 Open the battery cover using the Open slider.
2 Insert the battery. Make sure that the + and – symbols on the
battery line up with the + and – symbols on your camcorder.
You can charge the battery with the included battery charger.
Fully charge the battery before using your camcorder for the fi rst time.
To charge the battery:
1 Insert the Li-ion battery into the charging bay. The battery label should be facing up, and
the icons on the battery should match the icons on the charger.
2 Connect one end of the power cord to the charging unit,
then plug the other end to the wall outlet.
When charging is complete, the LED turns green.
It takes about fi ve hours to fully charge the battery. The actual
charging time varies depending on current battery capacity
and charging conditions.
Using the LCD
4
1 Zoom meter
2
Indicates the total recorded time of the
current video
3 Macro
4 LED light
5
Memory indicator: INT is displayed when video/
photos are being stored to the internal memory. A
memory card image is displayed when video/photos
are being stored to an inserted memory card.
The bar is only visible in Video mode and indicates the
memory available for video/photo storage. The green
area on the bar indicates the amount of memory used.
6 Video quality
7 Dual Video mode
8 File Format
9 Date / Time stamp
10 Battery indicator
11 Stabilization
12 Exposure indicator
13 Color balance
14 Video format
15 Mode indicator
NOTE: See your User Guide on the enclosed CD for more
information about using your LCD