Iiyama L400W - Manual (Page 12)

M e n u : 1
1280 × 768
H: 44 KHz V: 56 Hz
Menu : 1
(Digital)
Digital Input
Adjustment Item Problem / Option Button to Press
Too dark
Too bright
Brightness * 1
Contrast
Too dull
Too intense
Return To Menu Highlight “Menu : 1” again.
Direct
Direct
Sharpness 1 2 3 4 5
Adjust the picture quality at resolutions of less
than 1280 × 768 when selecting “1” or “2 at “Full
Screen” on Menu:2.
You can change the picture quality from 1 to 5
(sharp to soft).
Press the + Button on the monitor or the Button
on the Remote Control to change the picture quality
in numerical order. Press the – Button on the monitor
or the Button on the Remote Control to change
the picture quality in reverse numerical order.
Color Temp.
Approx. 9300K Color1
User
Color2
Mode1 Normal
Mode2 High contrast
Mode3 Dark
Gamma
Approx. 7500K
or
or
or
Red
or Green
Blue
Too dull
Too intense
10 OPERATING THE MONITOR
You can skip the Menu pages and display an
adjustment scale directly by using the
following button operations.
l Brightness
Press the Brightness Button on the monitor
or the Remote Control when the Menu is not
displayed.
l Contrast
Press the Contrast Button on the monitor or
the Remote Control when the Menu is not
displayed.
SWITCHING BRIGHTNESS / CONTRAST
ADJUSTMENT
To switch between Brightness and Contrast
adjustments, press the Menu Button within
10 seconds after pressing the Brightness
Button or the Contrast Button during the
direct adjustments above.
NOTE
Direct
* 1 Adjust the Brightness when you are using
the monitor in a dark room and feel the
screen is too bright.