IDEAL INDUSTRIES Dual View Thermal Imaging Camera HeatSeeker 160 - Manual (Page 8)

#61-846
ND-7521-1 Page 8 of 25
4.2. Image alignment
As the visible and thermal cameras are not co-axial the visible and thermal image may need to
be aligned. This is usually required when moving to view objects at different distances.
4.2.1. Press Function Key 1 to toggle to the alignment icon .
4.2.2. Use the up/down and left/right navigation buttons to align the thermal
and visible images.
Note The visible image is moved during alignment.
Examples of alignment.
Fully Aligned
Align left Align right
Align up Align down
Four pre-programmed alignment distances are included. These are at 1.5ft, 3ft, 6ft and
12ft ranges. With the alignment option selected by function key 1, pressing the center
navigation button once aligns at 6ft. Pressing the center navigation button repeatedly
cycles through to 12ft, 1.5ft and 3ft.
Note: These values appear in Metres if °C is selected.