IBM 19K4260 - Manual (Page 10)

1-4 Bluetooth PC Card from IBM: Installation and User’s Guide
5. Double-click the Win9x folder, then select dgahci.vxd.
6. Click OK.
7. Click OK.
8. Click Next, then click Finish.
Note: If the Version Conflict window appears, continue with steps 9 and 10.
Otherwise, the device driver installation is complete.
9. Click Yes.
10. Click No.
The device driver installation is complete.
Windows 98, Windows 98 SE, or Windows Me
1. Insert the PC Card into either of the PC Card slots (PCMCIA slots) on your
computer. The Insert Disk window will appear.
Note: If you are prompted for the location of a driver, select the appropriate
subdirectory on the CD-ROM drive. The driver subdirectories are
located in the /DRIVERS directory.
2. Follow the instructions on your screen.
3. If the DHCP Client window appears, then click No.
4. Once the driver is installed, click Finish.
5. Click Yes to restart your computer.
After your computer restarts, the device driver installation is complete.
Windows 2000
1. Insert the PC Card into either of the PC Card slots (PCMCIA slots) on your
computer. The Insert Disk window will appear.
Note: Windows will install four separate device drivers. If you are
prompted for the location of a driver, select the appropriate subdirec-
tory on the CD-ROM drive. The driver subdirectories are located in
the /DRIVERS directory.
2. The Found New Hardware Wizard window opens for the Bluetooth PC Card.
Follow the instructions on your screen.
3. The Found New Hardware Wizard window opens for the Bluetooth Ethernet
Adapter. Follow the instructions on your screen.
4. The Found New Hardware Wizard window opens for the Bluetooth RF
COMM Protocol. Follow the instructions on your screen.
5. The Found New Hardware Wizard window opens for the Bluetooth SCP Pro-
tocol. Follow the instructions on your screen.
6. When the last device driver has completed installation, click Start, then click
Shut Down .
7. Click Restart, then click OK to restart your computer.