1 press the preset button, Using hold, 2 set the hold switch to off to enable all buttons – Insignia NS-R5111 User Manual

Page 7: Setting the time, 1 press and hold the stereo/time set button

Advertising
background image

NS-R5111 Arm Band Radio

5

www.insignia-products.com

To recall preset stations within the
selected band:
1

Press the PRESET button.

2

Press the TUN UP or TUN DN button to change to a
different stored station.

When the batteries are low, the LCD will start flashing
and eventually shut off.

Press the ON/OFF button to turn off the radio,
then replace the batteries.

Using Hold

To use the Hold feature:
1

Set the HOLD switch to ON and all buttons will be
disabled. The Hold indicator appears on the LCD.

2

Set the HOLD switch to OFF to enable all buttons.

Setting the time

To set the time during power off mode:
1

Press and hold the STEREO/TIME SET button.

2

Press the TUN UP button (hour) to set the hour, then
press the TUN DN button (minute) to set the minute.

3

Press and hold the STEREO/TIME SET button to
exit Time Set mode.

Note

Time must be reset after you change the
batteries.

Note

You cannot set the time during power on
mode.

Advertising