Insignia NS-10PDH - Manual (Page 13)

13
Insignia NS-10PDH 10.1" Portable DVD Player
www.insigniaproducts.com
Connecting the AC adapter
To connect the AC adapter:
1 Plug the AC adapter into the DC IN jack on the left side of your player.
2 Plug the AC adapter plug into a 110 V power outlet.
Connecting the car adapter
To connect the car adapter:
1 Plug the car adapter into the DC IN jack on the left side of your player.
2 Plug the other end of the adapter into a car cigarette lighter socket.
3 Turn on your player.
Caution
Always turn off your player before you unplug the AC adapter, or
you may damage your player.
Cautions
• You cannot use the car adapter to charge the battery.
• Do not connect the car adapter to a vehicle which uses a
voltage of 24 V. See the documentation that came with
the vehicle.
• If the display does not work normally when the vehicle is
running, disconnect the car adapter and turn off your
player. Reconnect the adapter, wait a few seconds, then
turn on your player.
Left side of player