IBM 6C4 User Manual
Page 212
# *E0=data compression disabled
# E0=echo disabled
ignore "0\r" or "OK\r\n" timeout 2 # Ignore modem response.
send "AT#F0*Q2\r"
# Trellis modulation disabled
# Retrain with adaptive rate
expect "0\r" or "OK\r\n" timeout 2 # Confirm commands successful
send "ATV0X0S0=2\r"
# Numeric response code
# AT compatible messages
# Answer on 2nd ring
expect "0\r" timeout 2
# Confirm commands successful.
done
waitcall:
ignore "2\r" timeout 1
# Ignore first ring.
expect "2\r" timeout 10
# Pick up second ring
# or timeout.
# Expect a connection response.
expect "1\r" timeout 60
done
page:
send "ATD%N,%R\r"
# %N = pager call center number
# commas=6sec wait time to
#
enter paging number.
# %R = return number
expect "0\r" or "3\r" timeout 30
# Confirm successful command.
delay 2
# Wait before hanging up.
send "+++"
# Assure command mode.
delay 2
# Allow mode switching delay.
send "ATH0\r"
# Hang up.
expect "0\r" timeout 2
# Confirm successful command.
done
ripo:
send "AT&F*E0E0\r"
# Reset to factory defaults.
# *E0=data compression disabled
# E0=echo disabled
ignore "0\r" or "OK\r\n" timeout 2 # Ignore modem response.
send "AT#F0*Q2\r"
# Trellis modulation disabled
# Retrain with adaptive rate
expect "0\r" or "OK\r\n" timeout 2 # Confirm successful command.
send "ATV0X0S0=0\r"
# Numeric response code
# AT compatible messages
# Auto-Answer disabled
expect "0\r" timeout 2
# Confirm commands successful.
done
#
error:
# Handle unexpected modem
# responses.
expect "8\r" or "7\r" or "4\r" or "3\r"
delay 2
done
194
pSeries 630 Model 6C4 and Model 6E4 User’s Guide