Cornelius ED Series - Manual (Page 17)

14 TD 218
REMOVAL AND REPLACEMENT OF AGITATORS
92089
Retain
Agitator Disk, R.H., With 2
Thumb Screw
Agitator Disk, L.H., With Center Hole
Front View
Valve Side
Top of Dispenser
Left
TO REMOVE LEFT, CCW AGITATOR
1. Remove center thumb screw by turning it counterclockwise.
2. Lift plastic agitator disk off of stainless steel agitator.
3. Grip agitation arms at the center and lift up.
4. Replace by reversing steps.
TO REMOVE RIGHT, CW AGITATOR
1. Remove the (2) retaining pins.
2. Lift plastic agitator disk off of stainless steel agitator.
3. Grip agitation arms at the center and lift up.
4. Replace by reversing steps.
Note: Refer to Sanitize Procedure in the Owners Instruction for complete cleaning and sanitizing
instructions.