Insignia NS-20CLTV - Manual (Page 17)

17
Insignia NS-20CLTV 20" Combo DVD/LCD TV
www.insignia-products.com
Changing the Install settings
To change Install settings:
1 Press TV MENU on the remote control, then
press to highlight the INSTALL icon.
The INSTALL menu appears.
2 Press to enter the menu.
3 Press to select one of the following
settings, then press to change the
setting’s value:
• LANGUAGE—Select ENGLISH,
FRENCH, or SPANISH.
• TUNER MODE—Select CABLE, AUTO,
or ANTENNA.
• AUTO PROGRAM—See “Programming
channels into memory” on page 10.
• CHANNEL EDIT—See “Programming
channels into memory” on page 10.
• FACTORY RESET—Select YES, then
press
to confirm resetting the TV to
all factory-set settings.
4 Press ENTER to return to the INSTALL
menu, then press TV MENU to exit the
on-screen menu.
Adjusting the VGA resolution
Supported VGA video modes:
If your computer is providing a video resolution
other than those listed above, the TV will display
a solid blue or black screen.
Changing your computer’s video resolution
The example below shows Windows XP
settings. Even if you use a different Windows
operating system, the basic setup methods are
similar. For changing video resolution on a
Macintosh computer, refer to your Macintosh
documentation.
To change your computer’s video resolution:
1 Click Start, then click Control Panel.
2 Double-click Display. The Display Properties
dialog box opens.
3 Click the Settings tab.
4 Change the Screen resolution to a
supported resolution. The ideal resolution for
this TV is 1280 × 768.
5 Click OK, then click Yes to save your
changes.
LANGUAGE
TUNER MODE
AUTO PROGRAM
CHANNEL EDIT
FACTORY RESET
MOVE SELECT RETURN
ENGLISH
EXIT ENTER
ANTENNA
INSTALL
TV mode
LANGUAGE
FACTORY RESET
MOVE SELECT RETURN
ENGLISH
EXIT ENTER
INSTALL
Other modes
Format Resolution Freq. (Hz)
VGA 640 Ч 480
640 Ч 480
640 Ч 480 60
70
75
SVGA 800 Ч 600
800 Ч 600
800 Ч 600 60
75
72
XGA 1024 Ч 768
1024 Ч 768
1024 Ч 768 60
70
75
WXGA 1280 × 768 60
SXGA 1280 Ч 1024 60