II Morrow Inc. 920 - Manual (Page 69)

Route “Direct To”
During navigation of a route, you may wish to
bypass one or more waypoints and proceed
directly to a destination waypoint. The route
“Direct To” option allows you to do this.
Select the active route from the route menu.
Then, select “Edit” as if creating a route.
Use the UP or DOWN ARROW keys to move
the marker arrow to the waypoint to which
you
wish to navigate. Then, press the
GOTO/NRST key to enter the waypoint as the
destination.
The route screen
shows “direct”
status to the
waypoint.
You can now navigate directly to the desired
destination waypoint.
D
28