IKEA FWM7 - Manual (Page 22)

Problem Possible cause Solution
The appliance
does not fill:
The water tap is closed. Open the water tap.
The inlet hose is squashed or
kinked.
Check the inlet hose connection.
The filter in the inlet hose or the in-
let valve filter are blocked.
Clean the water inlet filters. (See
"Cleaning the water inlet filters"
for more details).
The water tap is blocked or is fur-
red with limescale.
Clean the water tap.
The connection of the water inlet
hose is not correct.
Check the inlet hose connection.
The water pressure is too low. Contact your local water authority.
The door is not properly closed. Close the door firmly.
The appliance
does not drain
the water:
The drain hose is squashed or
kinked.
Check the drain hose connection.
The drain filter is clogged. Clean the drain filter.
The connection of the drain hose is
not correct.
Check the drain hose connection.
An option or a programme that
ends with the water still in the tub
or a that eliminates all the spinning
phases has been selected.
Select the draining or spinning
programme.
The appliance
door is open or
not closed cor-
rectly.
Close the door firmly.
The appliance
does not start:
The plug is not properly inserted in
the power socket.
Insert the plug into the power
socket.
There is no power at the socket. Please check your domestic electri-
cal installation.
The main fuse has blown. Replace the fuse.
The programme selector dial is not
correctly positioned and the button
5 has not been pressed.
Please turn the selector dial and
press the button 5 again.
The delay start has been selected. If the laundry are to be washed
immediately, cancel the delay
start.
The Child Lock function is activa-
ted.
Deactivate the Child Lock function.
ENGLISH 22