Operation - gbmh kit – IOGear GBMA201 User Manual
Page 12
Operation - GBMH KIT
10
Step 1- Turn ON Bluetooth Headphones
Press and hold the Center button for approximately six seconds until the blue LED starts flashing
Step 2 -Turn ON Bluetooth transmitter
Press and hold the ON/OFF button for approximately three seconds until the blue LED starts flashing
Step 3 - Auto-connect
Wait approximately 60 seconds as both devices search for each other and auto-connect. When the
blue LED stops flashing and becomes solid on both devices, this indicates successful connection
Step 4 - Finished
Simply plug in the transmitter to your favorite music device and enjoy!
Note:
The Bluetooth headphones may also be used with a Bluetooth-enabled device that supports the
A2DP profile. For more information, consult the section of the manual “Instructions for GBMH201”.