Intel Core 2 Duo - Manual (Page 28)

Intel Core 2 Duo Processor and Intel Q35 Express Chipset—Setting Up and Configuring the
Development Kit
Intel ® Core TM 2 Duo Processor and Intel ® Q35 Express Chipset Development Kit
User’s Manual October 2007
28 Order Number: 318476001US
3.3 BTX Heatsink Setup with SRM
This section describes BTX casing which uses “Support and Retention Module (SRM)” as
shown in Figure 19 .
Note: SRM is not included in this development kits.
3.3.1 SRM Alignment on any BTX Board
Attach the BTX Thermal Module Assembly (TMA) over the processor to the Support and
Retention Module (SRM) by following procedures described below.
Figure 18. Mounting the Standoff for BTX Heatsink
Figure 19. Casing with “Support and Retention Module”