Insignia NS-32E570A11 - Manual (Page 15)

11
Insignia 32" LED-LCD HDTV, 1080p
www.insigniaproducts.com
Connecting a component video device
To connect a component video device:
1 Make sure that your TV’s power cord is
unplugged and the component video device is
turned off.
2 Connect a component video cable (provided) to
the COMPONENT IN jacks on the side of your
TV and to the COMPONENT OUT jacks on the
component video device.
3 Connect an audio cable (not provided) to the
AUDIO IN jacks on the side of your TV and to the
AUDIO OUT jacks on the component video
device.
To play from the component video device:
1 Turn on your TV, then press INPUT to open the
Input Source list.
2 Press or to select Component, then press
ENTER.
3 Turn on the component video device, then set it
to the output mode. See the documentation
that came with the device for more information.
Connecting a computer
To connect a computer:
1 Make sure that your TV’s power cord is
unplugged and the computer is turned off.
2 Connect a VGA cable (not provided) to the
VGA IN jack on the back of your TV and to the
VGA jack on the computer.
3 Connect an audio cable with stereo mini plugs
to the VGA IN audio jack on the back of your TV
and to the LINE OUT or AUDIO OUT jack on the
computer.
To play video from the computer:
1 Turn on your TV, then press INPUT to open the
Input Source list.
2 Press or to select VGA, then press ENTER.
3 Turn on the computer and adjust the display
properties if necessary.
Note
You can also press INPUT repeatedly to select the
component video device.
Side of TV
Component video device
Component video
cable
Audio cable
Cables are often color-coded to
match color-coded jacks.
Tip
Some computers have an HDMI jack. You can use an
HDMI cable to connect the computer for a better
picture.
Note
The VGA cable should be a 15-pin D-Sub (analog
RGB) cable.
Note
You can also press INPUT repeatedly to select the
computer.
Back of TV
VGA cable
Audio cable with
stereo mini plugs