IBM 100/10 - Manual (Page 126)

TPC-642 User’s Manual 116
Appendix B Installing PC/104-Plus Modules
B.1 Installing PC/104-Plus Modules
The PCM-9575's PC/104 connectors give you the flexibility to attach PC/
104+ modules.
Installing these modules on the PCM-9575 is quick and simple. The fol-
lowing steps show to mount the PC/104+ modules:
1. Remove the PCM-9575 from your system, paying particular atten-
tion to the safety instructions already mentioned above.
2. Make any jumper or link changes required to the CPU card now.
Once the PC/104+ module is mounted, you may have difficulty in
accessing these.
3. Normal PC/104+ modules have male connectors and mount
directly onto the main card. (Refer to the diagram on the following
page.)
4. Mount the PC/104+ module onto the CPU card by pressing the
module firmly but carefully onto the mounting connectors.
5. Secure the PC/104+ module onto the CPU card using the four
mounting spacers and screws.