Insignia NS-LDVD26Q-10A - Manual (Page 11)

5
www.insigniaproducts.com
3 Secure the stand with the eight provided
screws.
4 Insert the stand cover. Make sure that the cover
goes inside of your TV/DVD combo.
5 Place your TV/DVD combo in an upright
position on a flat surface.
Attaching a wall-mount bracket
(NS-LDVD26Q-10A)
To attach a wall-mount bracket
(NS-LDVD26Q-10A):
1 If the stand is installed, remove the eight screws
that secure the stand to your TV/DVD combo.
2 Secure the wall-mount bracket (not provided) to
the back of your TV/DVD combo using four of
the screws you removed in Step 1. These are
M4*16 (4 mm in diameter and 16 mm in length)
screws.
 
Warning
These instructions are for use by qualified service
personnel only. To reduce the risk of damage or
injury, do not wall-mount your TV/DVD combo
unless you are qualified to do so.
Note
Save the four extra screws for future use.
3.
93
7"
(1
00
m
m
)
3.937"
(100 mm)
Wall-mount
bracket
location