Icom IC-F4063T/S - Manual (Page 17)

13
4
LTR OPERATION
4
• Make a phone call
q Select the phone channel of LTR system channel.
• “ ” appears.
w Push [PHONE] (or push [PTT]).
• “ ” blinks.
e Push [DTMF Autodial] (or while pushing and holding [PTT]
enter the desired telephone number using 10 key pad) to
make a phone call.
r After conversation is finished, push [PHONE] (or while
pushing and holding [PTT], push [#]) to disconnect the
phone call.
• “ ” stops blinking.
*:Depending on the pre-setting.
■
Transmitting a call
D Group call
q Push [CH Up] or [CH Down], or rotate [ROTARY SELEC-
TOR]* to select the LTR system channel or talk group.
w While pushing and holding [PTT], speak into the micro-
phone at a normal voice level after a beep is emitted.
• If an error beep is emitted, release [PTT]. After a while, repeat
step w .
• The beep can be turned OFF in User set mode.
D Selective call (DTMF call)
q Push [CH Up] or [CH Down], or rotate [ROTARY SELEC-
TOR*] to select the LTR system channel or talk group.
w Push [DTMF Autodial]— a DTMF encode channel
appears.
e Push [CH Up] or [CH Down] to select the desired DTMF
encode channel.
r Push [PTT] to transmit the selected DTMF code in the
selected DTMF channel.
• Push [DTMF Autodial] to cancel the DTMF transmission.
002 ch-03
fH 173.7M
SET DTMA DTMA DTMR DTMR PHN
Blinks