IBM THINKPAD 92P1989 User Manual

Page 2

Advertising
background image

2

Installing Optional memory

The following terms are trademarks of the IBM Corporation in the United States
or other countries or both:
IBM, ThinkPad, TrackPoint, ThinkLight, ThinkVantage, UltraNav, and UltraConnect.

Your name:

Company name:

Model number:

Serial number:

Company or reseller service:

IBM service Web site:

IBM service number:

Some ThinkPad computers have an embedded security chip.
To learn about downloading the soft ware and enabling the chip, enter

security chip" in the Access IBM keyboard search field.

"

Security

Barcode

You can increase the amount of memory in your computer.

Verify proper installation of the optional SO-DIMM:

1 Turn on computer.

2 Press the Access IBM button when prompted during startup.

3 Double-click the "Start setup utility" icon to open the IBM BIOS Setup Utility.

4

100% Recycled Paper.
Printed in the USA.

1

Install the optional SO-DIMM:

1

2

Turn off the computer.

3

4

5

Remove the battery.

6

Loosen the screws on the memory slot cover, and
then remove the cover.

7

8

9

Replace the memory slot cover.

10

Note: Only use memory types supported by your computer. If you incorrectly install the optional memory or install an
unsupported memory type, a warning beep will sound when you try to start the computer. To replace the standard memory
that is accessed by removing your keyboard, refer to the procedure described within Access IBM.

Touch a grounded metal object to reduce
any static electricity in your body that could
damage the SO-DIMM. Avoid touching the contact
edge of the SO-DIMM.

Close the computer display and turn the computer
over.

Disconnect the ac adapter and all cables from the
computer.

Align the notch in the contact edge of the SO-DIMM
with the divider in the socket. Firmly insert the
SO-DIMM into the socket at an angle of 20 degrees

, and then pivot it downward until it snaps into

place

1

2

.

Attention: Never use the computer with the
memory slot cover open.

Replace the battery and re-connect the AC
adapter and cables.

Verify that the "Installed memory" item shows the total amount of memory installed in your computer. For example, if your
computer had 256 MB of standard memory and you install an additional 512 MB SO-DIMM, the quantity shown in
"Installed memory" should be 768 MB.

You can get information about ThinkVantage Technologies
at any time by pressing the blue Access IBM button on your keyboard.

Access Connections

Some ThinkPad computers are equipped with a wireless LAN adapter.
To learn more about configuring wireless LAN and other communication
adapters, enter "Access Connections" in the Access IBM keyword search
field.

Migration

You can move data from your old computer to this ThinkPad.
Enter "migration" in the Access IBM keyword search field to learn about
downloading free data migration soft ware.

IBM Help and Support

To learn about IBM Help and Suppor t, choose the Get Help & Suppor t
category in Access IBM.

* Additional unpacking notes: 1) Some models may contain items that are not listed. 2) If any

item is missing or damaged, please contact your place of purchase. 3) Your computer
features IBM Disk-to-Disk Recovery. Everything for recovering factory-installed files and
applications is on your hard disk eliminating the need for a recovery CD. For more information,
see "Recovering Pre-Installed Software" in the Service and Troubleshooting Guide.

If a SO-DIMM is already installed, remove it as
shown. Save the SO-DIMM for future use.

©

Copyright IBM Corporation 2003

Advertising