InFocus XGA multimedia projector LP930 - Manual (Page 32)

23
Press anywhere on the edge of the disk mouse to move the cursor
on the screen. You can move the cursor at any angle by pressing
the corresponding edge of the disk. The mouse button on the top
of the remote simulates your computer’s right mouse button; the
button on the bottom simulates your computer’s left mouse but-
ton. When you press the disk mouse, the remote lights up. The
light goes off about 10 seconds after you stop pressing buttons.
To use the laser pointer, press and hold the laser button. The laser
goes off when the button is released.
If you are creating presentations in Microsoft
®
PowerPoint
®
, you
can use the remote’s mouse buttons to navigate through your
presentation while in Slide Show mode. To configure PowerPoint
for this, choose Options from the Tools menu, click the View Tab,
de-select the “Popup Menu on Right Mouse Click” option in the
Slide Show section, then click OK. Then, when you’re in Power-
Point’s Slide Show mode, a left click advances to the next slide
and a right click returns to the previous slide (other PowerPoint
modes are not affected).
NOTE: In some cases, you can
use the projector’s Controls menu
to configure the mouse for Power-
Point. See page 37 for details.