Intermec EASYCODER PL4 - Manual (Page 10)

10 EasyCoder PL4 Printer User’s Guide
5 The charger LED will indicate the status of the charger as
follows:
Charger LED Status Description
Steady on light The battery is undergoing a fast charge.
Slow blinking light The charger is in trickle mode. The battery
is ready for use.
Rapidly blinking light There is a problem with the battery. It may
have an internal short or its charge
monitoring circuitry may be
malfunctioning. Do not use the battery.
Using the 4-Pack Charger
Please follow these guidelines when situating the 4-pack charger:
• Do not place the charger in locations where liquids or
metallic objects may be dropped into the charging bays.
• Do not block the ventilating slots on the top and bottom
covers.
• Make sure the charger is plugged into a power source that
stays on for overnight charging.
To charge the battery with the 4-pack charger
1 Make sure the charger has been installed properly. See the
guide that came with your 4-pack charger for help. The
power indicator on the front panel should be on.