IBM PROJECTOR C400 - Manual (Page 35)

Item Description Default
Gamma Press the cursor left/right button
to adjust the gamma correction
of the display.
Input/Gamma/Brightness:
PC/2.2/High, MAC/1.8/High,
Video/2.4/Low, Chart/2.2/Low,
B&W/2.4/High
PC
Color Space Press the cursor left/right button
to adjust the color space.
Range: Auto/RGB/YpbPr/YCbCr
Auto
Cancel Press the enter button to reset
Brightness, Contrast, Sharpness,
Color Temperature, Color
Saturation, Color Tint, Gamma,
and Color Space to default
values.
Not applicable
Properties menu
The Properties menu can be found through the main menu. To access the
Properties menu, follow these steps:
1. Press the Menu button to open the main menu.
2. Press the cursor left/right button to move to the Properties menu.
3. Press the cursor up/down button to move up and down in the Properties
menu. The Properties menu is shown below.
The following table shows the options that you will see in the Properties menu
and the default.
Chapter 5. On-Screen Display menu controls 5-3