Inova GigaHub PD008310103.001 AB - Manual (Page 11)

©2002 Inova Computers GmbH Page 1-4 Doc. PD008310103.001
Getting Started GigaPACK
Remove any existing graphics board from your computer (if the GigaCHAMPION is designed to
replace it!) or disable the on-board graphics capability on the motherboard. You may have to refer
the documentation that came with your computer to perform this step. If removing an existing
PCI card remember to save the locking screw.
IONVA GigaCHAMPION™
PCI SLOT
VIDEO CARD
Locate the PCI graphics slot and if necessary, remove the metal dust cover. Grasp the
GigaCHAMPION by the top edge and position it over the PCI slot ensuring that the contacts are
aligned and then press it in until it is fully seated.
SCREW
H
EXISTING GRAPHICS CARD
4
3