Infinite Peripherals PP-55 - Manual (Page 21)

.
.
.
.
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
.
.
.
.
Infinite Peripherals, Inc. Page 21
www.ipcprint.com
PP-55 User’s Manual v4.01 for Pocket PC
Printer & Port Configuration
Depending on your Pocket PC device, Print Manager [Ports] options must be configured
correctly in order for the PP55 to properly communicate with your device.
* Tap on the [ Other ] menu item and select [ Printer
Settings ] as shown in the figure on the right.
Printer:
By default, printer is configured to use the [ PP55 ] thermal
printer. If PP-55 is not selected, use the drop-down arrow
to select the PP-55 printer.
Figure 21
Note:
The default printer needs only to be set once. After the initial configuration Print Manager
remembers that last configuration. Installing Print Manager resets the default printer settings and
requires reconfiguration
Connection:
By default, Print Manager is configured to use the [ RS232
] communications port.
If you are not certain what communications port your
device supports, use the default printer port settings.
Note:
The default port speed should be the same as the PP55
port speed. Factory default of the PP55 port speed is set to
[115200]. Do not use other port speed unless you are
certain that the PP55 port speed is different from the
factory default.
Figure 22