Interquartz BASIC PHONE 98380 - Manual (Page 7)

6
RINGER
HI / LO / OFF
SWITCH
TONE / PULSE
SWITCH
RINGER PITCH
CONTROL
Ringer Pitch Control
Located on the base of the unit ( see Figure 4 ). Rotating this knob alters
the pitch of the ringing signal.
Tone / Pulse Switch
Located on the base of the unit ( see Figure 4 ). Used to select the
correct dialling mode, either TONE or PULSE. If you have any doubt
about the system supplied to your phone, contact your Network Supplier.
Redial / Pause Button
Press to redial the last number dialled when entered as the first key.
Serves as a pause button when there is a preceding digit(s) entered.
Mute Button
Located on the underside of the handset. Press to cut off speech
transmission during a conversation. Release to resume.
Figure 4 Switch Location
TIMED BREAK /
EARTH RECALL
SWITCH
VOICE
MESSAGING
( S1/ S2 / N )
SWITCH