Installation method 2 - screw mount, Wiring your car hd radio cd deck, Removing the cd deck (din installation) – Insignia NS-HD5113 User Manual

Page 7: Installing the front panel

Advertising
background image

5

Insignia NS-HD5113 Car HD Radio CD Deck with USB Port

www.insigniaproducts.com

3 Install the outer trim frame on the CD deck.

4 Connect the antenna, the main wire harness

(see “Wiring your car HD radio CD deck” on
page 5)
, and the rear mounting bolt (if
necessary to support your CD deck). Leave the
iPod

wire (see “Wiring your car HD radio CD

deck” on page 5) accessible.

5 Slide the car HD radio CD deck into the

mounting sleeve until it clicks into place.

6 Secure the rear mounting bolt to the firewall or

other sturdy support using the back strap (if
necessary).

Installation method 2 - screw mount

To install the car HD radio CD deck using the
screw holes:

1 Remove the hooks from the sides of your CD

deck.

2 Mount the brackets to the sides of the CD deck

using two screw holes on each side.

3 Connect the antenna, the main wire harness

(see “Wiring your car HD radio CD deck” on
page 5),
and the rear mounting bolt (if
necessary to support your CD deck). Leave the
iPod wire (see “Wiring your car HD radio CD
deck” on page 5
) accessible.

4 Fasten the brackets to the mounting location in

your car’s dashboard or console.

Wiring your car HD radio CD deck

Connect the wires to the back of the CD deck as
shown in the following illustration. You must wire
the main wiring harness prior to installing the CD
deck into the dashboard.

Removing the CD deck (DIN installation)

To remove the CD deck:

1 Remove the outer trim frame from the CD deck.

2 Insert the keys (supplied) into the sides of the

CD deck (as shown) until they click and release
the internal locks, then slide the deck out of the
mounting sleeve.

Installing the front panel

To install the front panel:

1 Put notch A onto shaft B, then press gently into

the right side of the head unit.

Note

The outer trim frame, the hooks, and the mounting
sleeve are not used for this installation method.

Brackets supplied with your car

Remove the hooks from both sides of your
CD deck

Caution

Be very careful to wire the main wiring harness
correctly. If you wire it incorrectly, or fail to properly
insulate the connections, you could damage the car
HD radio CD deck, your speakers, your car, or all of the
above.

Shaft B

Notch A

NS-HD5113_09-0642_MAN_ENG_V3.book Page 5 Thursday, July 30, 2009 12:52 PM

Advertising