Turning on the printer – Intermec PF8T User Manual
Page 28
Chapter 2 — Installing the Printer
PF8d/PF8t Printers User’s Guide
15
12
Click the Finish button to exit the New Hardware Wizard.
InterDriver files are now installed on your PC.
Turning On the Printer
To power the printer
1
Place the printer on a stable surface.
2
Place the power supply adapter in a suitable location between
the printer and an electrical outlet. The power supply adapter
can be use for 100 to 240 VAC, 50 to 60 Hz. The
configuration of the supplied power cord differs according to
national standards.
3
Make sure the printer’s On/Off switch is in the Off position
(O).
4
Insert the power cord’s round connector into the power
receptacle in the back of the printer.
5
Insert the power cord plug into an AC socket.
6
Turn the On/Off switch to the On position (
⎯
).
Danger of personal injury if the printer and power supply
are operated in an environment where they can get wet.
Only use with Intermec power supply adapter
P/N 1-092363-xx.