Intermec PF8T User Manual
Page 45
Chapter 3 — Troubleshooting and Maintaining the Printer
32
PF8d/PF8t Printers User’s Guide
6
Use one hand to hold the printer and the other hand to pull
the cleaning card forward until you pull the card out of the
printer.
7
Repeat Steps 4-6 to complete a second cleaning pass.
8
Dispose of the used cleaning card and reload media and
ribbon supplies.
Adjusting the Thermal Printhead Pressure (PF8t only)
When you print with different label materials or use different
types of ribbons, print quality may affected due to differences in
the material. If this happens you will need to adjust the thermal
printhead pressure for the type of material you are using.
To adjust thermal printhead pressure
1
Turn off power to the printer.
2
Press the cover open buttons on both sides of the case to open
the top cover. Fold the cover upwards/rearwards.
3
Using a straight-slot screwdriver, turn the screws clockwise to
increase printhead pressure or counterclockwise to decrease
printhead pressure.
Adjustment
screws
(2 places)
PF8t