IBM ILC200 - Manual (Page 16)

connector, you’ll need an S-video cable in addition to the audio cable and
audio adapter. The S-video cable is sold separately. See Accessories in
Appendix A.
1. Plug the yellow connector of the composite video cable into the
“video-out” connector on your video player. This connector might be
labeled “To Monitor.” Or, if you are using an S-video cable, connect it to
the “S-video out” connector on the video player.
2. Plug the other yellow connector into the composite video connector on the
projector. Or, if you are using S-video, plug the other end of the cable into
the “S-video” connector on the projector.
Note: High Definition Television (HDTV) sources are connected to the
projector using the M1-DA computer cable.
1 Composite cable 2 Audio cable 3 Audio adapter
3. Plug the white connector of the audio adapter into the left “audio out”
connector on your video player. Plug the red connector of the adapter into
the right “audio out” connector on the video player.
4. Plug the other end of the audio adapter into the audio cable.
5. Plug the audio cable into the “audio in” connector on the projector.
Note: The audio adapter is provided so that the same audio cable that is used
to connect a computer can be used with the adapter to connect a VCR.
Note: Your video player might also have a “Video Out” connector for a coaxial
cable connection. Do not use this to connect to the projector.
1-8 iLV200/iLC200 IBM Data/Video Projector: User’s Guide