IBM ILC200 - Manual (Page 22)

Using the keypad and remote control buttons
While the menus are displayed, the volume, source, and standy buttons on the
keypad act as menu navigation buttons. See “Using the on-screen menus” on
page 1-15.
Lamp on/off (keypad only)
Press the lamp on/off button to turn the lamp on or off. The Lamp LED
indicates the state of the lamp. When the Lamp LED lights green, you can turn
the lamp on, or the lamp is currently on. An orange LED indicates the software
is initializing or the lamp is cooling. Do not press the lamp on/off button
when the LED is orange.
Menu
Press the menu button to open the on-screen menus. Press menu again to close
the menus. When you close the menus, the projector saves any changes that
you made. For more information about the on-screen menus, see “Using the
on-screen menus” on page 1-15.
1-14 iLV200/iLC200 IBM Data/Video Projector: User’s Guide