IBM ILC200 - Manual (Page 25)

Display menu
The following settings allow you to adjust the display.
Display Audio Image C ontrols Language Status
> >
Brightness
C ontrast
Tint
C olor
Sharpness
Blank screen blue
Reset all
Brightness
Adjusting the brightness changes the intensity of the image.
v Press the left navigation button to darken the image.
v Press the right navigation button to lighten the image.
Contrast
The contrast controls the degree of difference between the lightest and darkest
parts of the picture. Adjusting the contrast changes the amount of black and
white in the image.
v Press the left navigation button to decrease the contrast.
v Press the right navigation button to increase the contrast, making the black
areas appear blacker and the white areas appear whiter.
Tint
The tint adjusts the red-green color balance in the projected image. Changing
the Tint setting has no effect on PAL or SECAM video sources.
v Press the left navigation button to increase the amount of green in the
image.
v Press the right navigation button to increase the amount of red in the image.
Color
The color setting adjusts a video image from black and white to fully saturated
color.
v Press the left navigation button to decrease the amount of color in the
image.
Installation and user’s guide 1-17