Insignia NS-C6500 - Manual

Required tools
Pencil
Keyhole or drywall saw
Phillips screwdriver
Small level
Fish tape or coat hanger
Wire strippers
Gloves
Safety goggles
Drill
1-inch fl at drill bit (if drilling through studs)
¼-inch to ½-inch drill bit (for drilling test hole)
Package contents
Insignia speakers (2)
Paint plugs (2)
Grills (2)
Template (1)
Mounting speakers in the ceiling
For stereo sound
Mount the speakers 6 to 10 feet apart. Each speaker should be the same
distance from the listening area. For detailed mounting instructions, see
“Ceiling mount instructions.”
For home theater sound
Mount the speakers 6 to 10 feet apart and 3 to 6 feet behind the
listening area. For detailed mounting instructions, see “Ceiling mount
instructions.”
Ceiling mount instructions
To mount the speakers in the ceiling:
1 Determine where you want to mount the speakers. The speakers
must be mounted in areas where there are no obstructions like
studs (joists). Tap the ceiling to fi nd a “hollow” space, or use a stud
fi nder to locate the studs.
Note: Make sure that your speaker wires are long enough to run from the
speakers to your audio equipment. If you plan to run the speaker wires
through the walls or ceiling, the wires must be UL or CL rated to ensure
your safety and to meet building code compliance.
2 Position the cardboard mounting template on the ceiling where
you want to mount a speaker, then trace around the template.
3 Drill a small hole in the center of the template outline you drew on
the ceiling.
4 Bend a piece of coat hanger wire, then insert the wire into the hole.
Slowly rotate the wire to check for any obstructions. If you fi nd an
obstruction, patch the hole and fi nd a new location for the speaker.
5 Using a keyhole or drywall saw, carefully cut the ceiling section you
outlined, then remove the section.
6 Run the wires from the speaker outputs on your audio equipment
to your speakers. Allow a few extra feet of wire so you will have
enough wire to strip the insulation and splice the wires.
Note: Use high quality wire such as 16/4 speaker
wire. If you need to run the wires a long distance,
you can splice one or more lengths of wires
together.
7 (Optional) To improve speaker performance, insert unbacked
fi berglass insulation behind and around the speaker.
Warning: To avoid personal injury, wear gloves when
inserting the insulation.
Setting up your in-ceiling speakers I Installation de vos haut-parleurs encastrables au
plafond | Instalación de sus altavoces empotrados en cielo raso NS-C6500