IBM AT-FS202SC/FS3 - Manual (Page 12)

Description
4
Key Features
The AT-FS20x switches have the following features:
❑
LEDs for unit and port status
❑
Auto MDI/MDI-X
❑
DIP switches for configuring the ports
❑
Half- or full-duplex operation on both ports
❑
RJ-45 twisted-pair connector
❑
SC or ST fiber optic connector
❑
Data packet forwarding and filtering at full wire speed (10 Mbps to
100 Mbps, 100 Mbps to 100 Mbps, and 10 Mbps to 10 Mbps)
❑
Store and forward switching mode
❑
Automatic address learning and aging
❑
IEEE 802.3u compliant Auto-Negotiation
❑
External AC/DC power adapters (North America, Continental Europe,
or United Kingdom)
❑
For use on a desktop or in an AT-MCR12 chassis
Status LEDs
Table 2 defines the LEDs for the switches.
Table 2 Status LEDs
LED Color Description
PWR Green Power is applied to the switch.
LNK/ACT Green
Blinking
A valid link has been established on the port.
Data is being received or transmitted on the port.