IBM B50 - Manual (Page 75)

Text-Based System Management Services
The text-based Open Firmware command line and System Management Services are
available if an ASCII terminal is attached to your server.
To start the text-based System Management Services instead of the Open Firmware
command line, press 1 on the ASCII terminal keyboard when the keyboard text
symbol appears during startup.
After the text-based System Management Services starts, the following screen
appears.
Note: The version of firmware currently installed in your server is displayed at the
top of each screen in the text-based System Management Services. Please
note the version number; processor upgrades may require a specified version
of firmware to be installed in your server. Update System Firmware is an
option under the Utilities menu.
System Management Services
1 Display Configuration
2 Multiboot
3 Utilities
4 Select Language
.------.
|X=Exit|
------'
====>
Selecting the numbered options provide capabilities described in this section.
After you have finished using the text-based System Management Services, type x
(for exit) to start your server.
Chapter 3. Using System Management Services 3-23