Chapter 2 system setup, Figure 2.1: install compactflash memory card, Figure 2.2: power connector – Intel TPC-1070 User Manual
Page 22: Chapter, 2 system setup
TPC-1070 User Manual
10
Chapter 2 System Setup
This chapter provides a brief explanation for operating the TPC-1070. It
is easy to make the TPC-1070 start working with the below step-by-step.
Step 1: Unpack the TPC-1070 package. Please check the packing list at
the beginning of this manual.
Step 2: Install a CompactFlash containing windows CE, embedded Win-
dows XP or other operating system.
Figure 2.1: Install CompactFlash memory card
Step 3: Connect the power connector to the 24VDC power lines. The
power lines can either be of some power adapter or in-house power
source.
Figure 2.2: Power connector
Warning
It is suggested to turn OFF system power as plug in
or pull out the memory card, though the Compact-
Flash memory is supposed to be hot swappable.