Insignia NS-DVB2G/DVB4G - Manual (Page 9)

7
Insignia NS-DV2G/NS-DV4G/ NS-DVB2G/NS-DVB4G Video MP3 Player
www.insignia-products.com
Charging the battery
Charge the battery whenever you aren't using the player to make sure it's always fully charged. The battery
charges in about 3 hours. A fully charged battery provides up to 20 hours of continuous music playback,
depending on the brightness and display time of the backlight, and the volume levels. You do not need to
fully charge the battery before beginning to use your player.
To charge the battery:
1 Turn on your computer.
2 Connect the supplied mini USB 2.0 cable to the mini USB jack on the player and a standard USB jack on
your computer. When the cable is connected correctly, the player begins recharging its battery using the
USB connection, and the message “OK to disconnect” appears on the player.
As the battery charges, the blue battery icon shows an animation of being filled from right to left, to
illustrate that the battery is charging.
After the player is fully charged, the battery icon turns green, indicating a full charge.
Connecting headphones
You can use any headphones with a standard 3.5mm stereo audio plug.
To connect headphones:
•
Plug headphones or the provided earphones into the earphone/headphone jacks on the player.
Installing the included software
The instructions in this guide require installation of both the Best Buy Digital Music Store Media Manager
Software and the ArcSoft Media Converter.
Note
To use Bluetooth headphones instead of standard wired headphones, see Connecting to Bluetooth
headphones (NS-DVB2G and NS-DVB4G models only) on page 24. Bluetooth is available on the
NS-DVB2G and NS-DVB4G models only.
Note
To use the FM radio, you must have the provided earphones connected, because they act as the FM
antenna. You can use any headphones with unshielded wires.
Note
Attention Apple Users (OS 8.6 and higher):
• Do not install the software.
• Connect your player to your computer.