Installation, Installation of the projector and screen, Angle adjustment – InFocus liquid crystal User Manual

Page 8

Advertising
background image

ENGLISH-6

INSTALLATION

INSTALLATION

Installation of the Projector and Screen

Refer to the drawing and table below for determining of the screen size and projection distance.

Top View

Side View

Diagonal Screen

Size [inches (m)]

a

[inches (m)]

b

[inches (cm)]

Min.

Max.

40 (1.0)

55 (1.4)

73 (1.9)

1 (3)

60 (1.5)

85 (2.2)

114 (2.9)

2 (4)

80 (2.0)

114 (2.9)

151 (3.8)

2 (6)

100 (2.5)

144 (3.7)

191 (4.9)

3 (7)

120 (3.0)

176 (4.5)

231 (5.9)

3 (9)

150 (3.8)

220 (5.6)

282 (7.2)

4 (11)

200 (5.0)

291 (7.4)

386 (9.8)

6 (15)

Angle Adjustment

Use the foot adjusters on the bottom of the
projector to adjust the projection angle. It is
variable within 0˚ to 9˚ approximately.
1. Lift up the front side of the projector, and

pressing the foot adjuster button, adjust the
projection angle.

2. Release the button to lock at the angle to be

fixed.

3. Make the foot adjusters screw for fine

adjustment. Do not force the adjusters to make
screw. This could damage the adjusters or
cause the lock to fail.

Foot Adjusters

The projection distances shown in the table below
are for full size (1024 x 768 dots).
a: Distance from the projector to the screen. (±10%)
b: Distance from the lens center to the bottom of the

screen. (±10%)

Table 1. Installation Reference

b

a

Lens center

Screen

CAUTION • Install the projector in a suitable environment according to
instructions of the accompanying manual “SAFETY INSTRUCTIONS” and this

manual.
• Please basically use liquid crystal projector at the horizontal position. If you use
liquid crystal projector by the lens up position, the lens down position and the side up
position, this may cause the heat inside to build up and become the cause of damage.
Be especially careful not to install it with ventilation holes blocked.
• Do not install LCD projector in smoke effected environment. Smoke residue may
buildup on critical parts (i.e.LCD panel, Lens Assy etc.).

CAUTION • Do not release the foot adjuster button unless the projector is
being held; otherwise, the projector could overturn or the fingers could get

caught and cause personal injury.

Variable within the range of approximately 0° - 9°

Advertising