Integra RDV-1.1 - Manual (Page 39)

39
Connecting —Continued
If your TV supports progressive scanning, you can con-
nect another video component (satellite/cable tuner, LD
player, etc.) to the RDV-1.1 and it will upconvert inter-
laced video to progressive. This is also useful when your
TV doesn’t have enough video inputs to connect all of
your components.
You can connect your other video component to the
RDV-1.1’s component, S-Video, or composite VIDEO
IN input, as shown
. To use the other component, on the
RDV-1.1, set the video input source to External (see
page 67
).
Notes:
• If the source video signal is unstable or of poor quality,
the picture may be distorted or flicker.
• The component video VIDEO IN has priority. If
there’s no signal present at that input, the RDV-1.1
uses the S-Video input. And if there’s no signal present
there, it uses the composite video input.
• See the table on page 27 for details on how the
RDV-1.1’s video outputs work with each video input
source.
About the HD COMPONENT VIDEO OUTs
When an SD (standard definition) video signal is fed to
the component, S-Video, or composite VIDEO IN
socket, and the video input source is set to External, that
video signal is upconverted to progressive and output by
the HD VIDEO OUT COMPONENT 1 and 2 sockets.
When an HD (high definition) video signal is fed to the
component VIDEO IN socket, and the video input
source is set to External, that video signal is output by
the HD VIDEO OUT COMPONENT 1 socket at the
same resolution.
Compatibility of this unit with progressive-scan TVs.
This player is compatible with progressive video Macro
Vision System Copy Guard.
CONSUMERS SHOULD NOTE THAT NOT ALL
HIGH DEFINITION TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE
PICTURE. IN CASE OF 525 OR 625 PROGRESSIVE
SCAN PICTURE PROBLEMS, IT IS RECOM-
MENDED THAT THE USER SWITCH THE CON-
NECTION TO THE “STANDARD DEFINITION”
OUTPUT. IF THERE ARE QUESTIONS REGARD-
ING OUR TV SET COMPATIBILITY WITH THIS
MODEL 525p AND 625p DVD PLAYER, PLEASE
CONTACT OUR CUSTOMER SERVICE CENTER.
O. Connecting Standard Video
Equipment for Progressive
Conversion
COAXIAL OPTICAL OPTICAL COAXIAL
DIGITAL 1 DIGITAL 2
DIGITAL 2 ( BALANCED)
AES/EBU
AUDIO OUT D. MIX FRONT SURR 1 CENTER SURR 2
L
R
L
R
IN
SUB
WOOFER
1
2
Y P B P R
OUT
OUT
IN
REMOTE CONTROL
VIDEO OUT
COMPONENT
VIDEO S VIDEO VIDEO
S VIDEO
Y
P B
P R
Y
P B
P R
IN
1+ 2 1
RS 232 HDMI VIDEO IN IR
S400 ( AUDIO)
AUDIO OUT
HD VIDEO OUT
COMPONENT
12 V TRIGGER
SURR MODE (AUDIO OUT)
Y
OUT
P B
P R
Y P B P R
Y
1
P B P R
COMPONENT
COMPONENT IN
L R
ANALOG INPUT
L
R
ANALOG
OUT
VIDEO IN
VIDEO
VIDEO OUT
VIDEO IN
Y
P B
P R
S VIDEO OUT
S VIDEO
VIDEO IN
TV
Satellite/cable tuner, etc.
Only one connection
required! Choose
component video, S-
Video, or composite
video.
AV RCA cable
Component video
cable (BNC)
(white)
(red)
(white) (red)