IBM SY27-0345-06 - Manual (Page 88)

9
Verify that the IBM 2210 is functioning correctly by using “MAP 0210: Verify
Operation” on page 2-23.
Removing the Optional Adapter
Figure 4-40. Removing the Adapter (Actual adapter may appear different)
1
Unplug the power cord.
2
Remove the screws holding the adapter in place.
3
Remove the adapter by gently pulling it toward you.
4
Replace the blank faceplate or install new adapter and tighten the two
screws.
5
Plug the power cord into the outlet.
6
Verify that the IBM 2210 is functioning correctly by using “MAP 0210: Verify
Operation” on page 2-23.
4-38 2210 Service and Maintenance