IBM HANDBOOK 260 User Manual
Page 80
62
RS/6000 43P 7043 Models 150 and 260 Handbook
3.1.3.12 PCI Storage Adapters
The following PCI SCSI adapters are supported in the Model 150
• PCI Single-Ended Ultra SCSI Adapter
• PCI Differential Ultra SCSI Adapter
• Serial Storage Architecture (SSA)
PCI Single-Ended Ultra SCSI Adapter (# 6206)
The PCI Single-Ended Ultra SCSI has a maximum data transfer rate of 40
MB/s which is two times the maximum data transfer rate of Fast/Wide
adapters and requires one PCI slot
PCI SCSI-2 Differential Ultra SCSI Adapter (# 6207)
The PCI Differential Ultra SCSI adapter is the next generation of SCSI-2
performance with a maximum data transfer rate of 40 MB/s and occupies one
PCI slot.
PCI SSA Multi-Initiator/RAID EL Adapter (# 6215)
The PCI SSA Multi-Initiator/RAID EL adapter allows up to eight RS/6000 to
attach to an SSA loop in non-RAID mode and two RS/6000 to attach in
RAID-5 mode and requires one PCI slot.
You can find more detailed information about the PCI storage adapters in 4.8,
“PCI Storage Adapters” on page 124.
3.1.3.13 Communications Adapters
The following communications adapters are officially supported in Model 150.
• IBM PCI Token-Ring adapter (# 2920)
• IBM PCI 10/100 Mbps Ethernet adapter (# 2968)
• ATM adapters
• Turboways 155 UTP PCI ATM Adapter (# 2963)
• Turboways 155 MMF PCI ATM Adapter (# 2988)
• Turboways 25 ATM PCI ATM Adapter (# 2998)
• FDDI adapters
• SysKonnect SK-NET FDDI-LP SAS PCI Adapter (# 2741)
• SysKonnect SK-NET FDDI-LP DAS PCI Adapter (# 2742)
• SysKonnect SK-NET FDDI-UP SAS PCI Adapter (# 2743)
• Asynchronous adapters
• PCI 8-Port Asynchronous Adapter EIA-232/RS-422 (# 2943)
• PCI 128-Port Asynchronous Controller (# 2944)