InFocus IN5104 - Manual (Page 18)

17
No computer image, just the words “Signal out of
range” Adjust computer refresh rate in Control
Panel>Display>Settings>Advanced>
Adapter (location varies by operating
system) Computer image projected
Image fuzzy or cropped Set your computer’s display resolution to
the native resolution of the projector
(Start>Settings>Control
Panel>Display>Settings tab,
select1024x768) Image clear and not cropped
Signal out of
range A
You may also need to set a different
resolution on your computer, as shown
in the following problem, “Image fuzzy
or cropped”
A
A
A
A
For a laptop,
disable laptop
monitor
or turn-on dual-
display mode
A