Igloo FR320UK - Manual (Page 5)

Reversing the Door Swing of your Appliance
This appliance has the capability of either opening the door from the left or right side. The unit is delivered to
you with the door opening from the left side. Should you need to reverse the opening direction, please follow
the instructions pertaining to your particular model.
NOTE: All parts removed must be saved to do the reinstallation of the door.
For models FR320UK
1. Remove door plate screws from the underside of the fridge, on the right side.
2. Unscrew and remove the left foot.
3. Unscrew the door plate from fridge
4. Remove the 2 Phillips screws which connect the upper hinge to the cabinet top.
5. Carefully lift the door, placing it on a padded surface to avoid scratching.
6. Set the refrigerator door in its new position, making sure the hinge pin enters the bushing at the bottom
of the cabinet.
7. While holding the door in the closed position, loosely secure the upper hinge using the parts removed in
Step 4. Before tightening the screws, make sure the top of the door is level with the cabinet top.
8. Secure (front plate, if applicable) and bottom plate with the screws.
9. Switch left foot to the right side and secure.
HINGE COVER
HINGE
DOOR
1
2
HINGE
PIVOT PIN
3
BOTTOM FOOT