Invacare RPS350-1 - Manual (Page 23)

SECTION 7—MAINTENANCE
Part No. 1078984 23 Stand Up Patient Lift
Replacing the Electric Actuator
1. Remove the bottom nut, washer and shoulder bolt that secure the electric actuator to the mast mounting bracket.
2. Rest the lift arm on your shoulder and remove the top nut, bolt, bracket and bushing from the lift arm mounting bracket.
3. Remove the electric actuator.
4. Reverse STEPS 1‐3 to install the new electric actuator.
ƽ WARNING
DO NOT overtighten mounting hardware. This will damage mounting brackets.
FIGURE 7.3 Replacing the Electric Actuator
Bolt
Washer
Bushing
Washer
Bolt
Bolt
Washer
Bushing
Washer
Bolt
Bracket