Insignia NS-LCD37 - Manual (Page 14)

12
Insignia NS-LCD37 LCD TV
www.insignia-products.com
Options include:
• Air
• Cable
• Cable HRC
• Cable IRC
• Cable Auto
4 Press EXIT to return to watching the
television.
Searching for channels
You should complete an auto channel search to
search for all channels available to your
television. The television then stores them in
memory on the channel list.
To search for channels:
1 Press MENU.
2 Press or to select Setup menu, then
press OK or to access the submenu.
3 Press or to select Auto Ch Search,
then press OK or to begin the auto
channel search. The television automatically
searches for all available TV/DTV (if using an
antenna) or CATV/CADTV (if using cable)
program.
Automatically adding channels
After the initial auto channel search, you can use
the Add On Channel Search option to search for
new stations, and add them to the channel list.
To automatically add channels:
1 Press MENU.
2 Press or to select Setup menu, then
press OK or to access the submenu.
3 Press or to select Add On Ch Search,
then press OK or to begin the add on
channel search. The television automatically
searches for new stations and adds them to
the channel list.
Manually adding or deleting channels
After saving channels into memory, you can
manually add or delete channels from the
channel list.
To manually add or delete channels:
1 Press MENU.
2 Press or to select Setup menu, then
press OK or to access the submenu.
3 Press or to select Manual Ch Set, then
press OK or to open the Manual Channel
Set Menu.
4 Press or to navigate and select a
channel, then press OK to add (displays
Viewable) or delete (displays Not Viewable)
the channel.
Note
If using cable, select the type of cable system your
television is connected to. If you are not sure,
select Cable Auto.
Note
If you want to stop the search, press the EXIT
button.
Note
If you want to stop the search, press the EXIT
button.