IMC Networks Wireless Outdoor Bridge XI-1500-IH - Manual (Page 8)

Build Point-to-Point and Point-to-Multipoint
Step
1 The hardware is installed.
Note: Please configuration all the parameters of the Wireless Outdoor Bridge
according to the actual conditions indoors. Install the Wireless Outdoor Bridge to
the bracket after the wireless chain is adjusted openly.
Note: The bracket that should be possible is high while installing the Wireless
Outdoor Bridge.
2
The equipment is initialized.
3
Use the Utility or WEB Management.
Method A: Using Utility Management
Installed on your Windows 98SE/NT/ME/2000/XP desktop computer, the Windows-based
utility “Access Point XI-1500-IH Utility” provides a user-friendly interface.
Insert the Software and Documentation CD into the CD-ROM driver.
Open the CD-ROM driver in the My Computer.
Follow the on-screen instructions to install the Access Point XI-1500-IH Utility.
Upon completion, go to Program Files and execute the Access Point XI-1500-IH
Utility. It will begin to browse all the Wireless Outdoor Bridge available on the
network.
8