First time setup – Integra DTR-4.6 User Manual
Page 36
36
First Time Setup
This section explains the settings that you need to make
before using the AV receiver for the very first time.
This section explains how to set the speaker settings.
Speaker Configuration
Here you can specify which speakers are connected and
their individual sizes.
For speakers with a cone diameter
over 6-1/2 inches (16 cm), specify
large,
and for those with a diameter
below this, specify
small.
Speaker Setup
1
Press the [Receiver] Remote
Mode button, followed by the
[Setup] button.
The main menu appears onscreen.
2
Use the Up and Down [
]/[
]
buttons to select “3. Speaker
Setup,” and then press [Enter].
The Speaker Setup menu appears.
3
Use the Up and Down [
]/[
]
buttons to select “Speaker Con-
figuration,” and then press
[Enter].
The Speaker Config menu appears.
Setup
Receiver
Enter
Cone diameter
3-1.Speaker Config
------------------------
a.Subwoofer :Yes
b.Front :Small
c.Center :Small
d.Surround :Small
e.Crossover :100Hz
f.Subwoofer Mode
:-----------
4
Use the Up and Down [
]/[
]
buttons to select “a. Subwoofer,”
and then use the Left and Right
[
]/[
] buttons to select:
Yes:
Select if a subwoofer is con-
nected.
No:
Select if no subwoofer is con-
nected.
5
Use the Up and Down [
]/[
]
buttons to select “b. Front,” and
then use the Left and Right
[
]/[
] buttons to select:
Small:
Select if the front speakers are
small.
Large:
Select if the front speakers are
large.
Note:
• If the Subwoofer setting in step 4 is
set to No, this setting is fixed at
Large.
6
Use the Up and Down [
]/[
]
buttons to select “c. Center,” and
then use the Left and Right
[
]/[
] buttons to select:
Small:
Select if the center speaker is
small.
Large:
Select if the center speaker is
large.
None:
Select if no center speaker is
connected.
Note:
• If the Front setting in step 5 is set to
Small, the Large option cannot be
selected.
7
Use the Up and Down [
]/[
]
buttons to select “d. Surround,”
and then use the Left and Right
[
]/[
] buttons to select:
Small:
Select if the surround left and
right speakers are small.
Large:
Select if the surround left and
right speakers are large.
None:
Select if no surround left and
right speakers are connected.
Note:
• If the Front setting in step 5 is set to
Small, the Large option cannot be
selected.