Intermate A/T FS3 - Manual (Page 4)

gs-019-02 A/T FS3 Getting Started. Edition 2. 9 November 2004
page 4 of 8
Figure 1 Initial Coax Options
Figure 2 Coax IPDS Options
Figure 3 Initial Twinax Options
Figure 4 Twinax IPDS Options
You can also use the front panel to enter an IPDS key in the parameter labelled Gateway address. Navigation is
the same as described for the other two parameters.
Figure 5 IPDS Key
The User’s Guide contains a table with page references to all options descriptions, showing all valid option values;
refer to “The Front Panel” in chapter 4, section 4.1.