IBM 09-0572-000 - Manual (Page 21)

PC Requirements 2-3
PC Requirements
Installation of the 3C619C adapter requires the following:
■
An ISA- or EISA-bus PC with at least 640 K of RAM and an
80386 processor.
■
An available 16-bit (ISA) or 32-bit (EISA) expansion slot.
■
A high-density 3.5 inch floppy diskette drive.
■
Network drivers.
■
Cabling type 3 (UTP) or types 1 or 6 (STP).
■
TokenDisk diskette with the installation, configuration, and
diagnostic programs.
■
One of the following operating systems:
■
OS/2

version 1.x or later (Novell

NetWare

OS/2
Requester)
■
NetWare 2.1x or 2.2 (Novell NetWare 286 Server)
■
NetWare 3.1x or later (Novell NetWare 386 Server)
■
MS-DOS

version 3.2 or later (Microsoft

DOS LAN Manager,
Banyan

VINES

DOS workstation, Banyan VINES 386 Server,
IBM

PC LAN Program, PC LAN Program, Novell NetWare
DOS Requester, IBM DOS LAN Requester)
■
MS-OS/2 version 1.x or later (Microsoft OS/2 LAN Manager)
■
IBM OS/2 EE version 1.1 or later (IBM LAN Server/
LAN Requester, Communications Manager)
■
IBM OS/2 version 2.0 or later (IBM LAN Server)
■
Windows NT version 3.51 or later or Windows 95
■
Available memory to load the 3C619C adapter driver from
the network operating system. Depending on the LAN
operating system, you may need additional free memory.
Refer to the relevant network operating system (NOS)
documentation for the exact memory requirements.
■
Multistation access unit (MAU), controlled access unit (CAU),
or dual access unit (DAU).