Insignia User Guide - Manual (Page 12)

12
Insignia NS-LTDVD19-09 19” LCD TV/DVD Combo
www.insignia-products.com
Using the basic controls
Turning the TV on and off
To turn your TV on and off:
1 Press POWER on the side of your TV or on
the remote control. The POWER/STANDBY
indicator turns blue.
2 To turn off your TV, press POWER again. The
POWER/STANDBY indicator turns red.
Adjusting the volume
You can adjust the volume using the controls on
your TV's side panel or the remote control.
To adjust the volume:
1 Press VOL+ or VOL- to increase or decrease
the volume.
2 Press MUTE to mute the sound, then press
this button again to restore the sound.
Changing the video mode
Your TV supports multiple video modes.
To select the video mode:
•
Press INPUT one or more times to select the
video mode, then press ENTER. You can
select:
•
TV
• AV
• S-Video
• Component
• DVD
• HDMI
• PC (VGA)
Using your TV
Selecting the TV signal source
To select the TV signal source:
1 Press TV MENU, then press / to
highlight CHANNEL. The CHANNEL menu
opens.
2 Press to enter the CHANNEL menu.
3 Press / to select TV Source, then press
/ to select Air or CATV.
• Air-VHF/UHF channels.
• CATV-Cable TV channels.
4 Press TV MENU one or more times to close
the menu.
Changing channels
To change channels:
•
Press the CH+ or CH- on the side of your TV
or the CH
or CH on the remote
control.
To enter a channel number directly:
•
Press the number buttons on the remote
control.
In digital TV mode, a main (major) channel
can have one or more sub. (minor) channels.
Press the number buttons to enter the main
channel, press the • button (to the left of the 0
button), then press the number button for the
sub-channel. For example, if you want to
watch channel 5.2, press 5, press the •
button, then press 2.
To go to the previous channel:
•
Press RECALL.
Using the on-screen menus
Use your remote control to navigate in the
on-screen menus.
To use the on-screen menus:
1 Press INPUT on the remote control to select
the video source.
2 Press TV MENU on the remote control. The
on-screen menu appears.
3 Press / to highlight the PICTURE,
AUDIO, TIME, OPTION, LOCK, or
CHANNEL icon, then press
to enter the
menu.
4 Press / to highlight a setting, then press
/ to change the setting.
5 Press TV MENU to close the menu.
Memorizing channels
To select channels with the CH buttons, your TV
first needs to memorize the channels. When
your TV memorizes channels, it scans for
channels with signals, then stores the channel
information into memory.
To automatically memorize channels:
1 Press TV MENU on the remote control, then
press / to highlight CHANNEL. The
CHANNEL menu opens.
2 Press to enter the CHANNEL menu.